close
The Wayback Machine - https://web.archive.org/web/20200511125553/https://2mm.org.uk/
calendar2mm Scale Association
What's new in 2mm scale modelling
With the Covid-19 virus pandemic, we have postponed the Diamond Jubilee Expo. Originally scheduled for June 2020, this will now take place in 2021, date to be arranged. The Diamond Jubilee Layout Challenge will also be delayed.
Wed, 18 Mar 2020 17:51:33 GMT
In anticipation of the 60th Anniversary of the 2mm Scale Association, we are running a layout building challenge to encourage as many layouts as possible to be available for the jubilee year.
Sat, 30 Mar 2019 09:35:28 GMT
The books "Track" and "Point Rodding", both relevant to modellers in all scales, and a sample 2mm Finescale Mineral Wagon kit, are available for ordering on the website.
Thu, 06 Dec 2018 08:16:01 GMT
The Black 5 Locomotive and Tender kit has not been available for a number of years despite the fact that the Association held many of the parts of which the kit is comprised. The kit is now relaunched as a set of independently available parts. Full details of how members can obtain the components are available on the shop 3 part of the website.
Thu, 01 Nov 2018 11:09:21 GMT
Nick Mitchell constructs a chassis for a LMS 4-6-0 Jubilee locomotive, videoing each step of the process.
Sat, 08 Sep 2018 12:25:05 GMT
Direct RSS feed BERJAYA   |   What is RSS ?

The 2mm Calendar

BERJAYA
A new publication covering the use of headcodes, tail lamps, side lamps, and the display of numbers and codes on trains from the 19th century until the current day. A concise guide for all serious modellers. Available to order on this website.

With the Covid-19 Virus situation, we have postponed the June 2020 Diamond Jubilee event. We trust that members can keep in touch through other means, such as emails and online services. Further details of our planned (and postponed) events are on the Events Page

 

The 2mm Scale Association exists to promote and facilitate modelling at the scale of 2mm:1ft. The scale has a long history as the smallest practical finescale standard.

By joining the Association, members gain access to a wealth of knowledge and our exclusive component range designed to enable simple and accurate construction.

Find out how to get started in 2mm FineScale; with the products available from the 2mm Scale Association its easier than you might think.

Our component ranges include jigs and alignment tools which remove the guesswork and need for specialist measuring equipment from precision model making. We also produce booklets which explain the construction techniques which have been developed over the years.

To keep our members in touch we produce a bi-monthly magazine and newsletter. For those with access to the internet we offer an email list where members can chat about anything pertinent to 2mm model making.

This website contains information about the Association and 2mm standards, articles about model making, and photographs to inspire the model maker.

How to join the 2mm Scale Association

New Articles from Area Group and Member Blogs

Everything new within the last 60 days. To add your blog or site, please contact webmaster.

NBR Waverley 3 Source: 2mm North East Area Group | 26 Apr 2020 | 9:38 pm BST
During the lockdown I have been able to progress my 2mm loft layout 'Copshawholm' and I enclose a few images which I hope you will find of interest. The above view is the south end of the station and also shows the yard exit road. Aargh - that fence is glaring white! The above shows the north  ....

NBR Waverley 2 Source: 2mm North East Area Group | 26 Apr 2020 | 9:07 pm BST
I suppose everyone is feeling a bit restricted during the current corona virus epidemic but at least it gives us extra time for modelling! I am currently building a 2mm layout based upon the NBR Waverley route and I am posting a few pictures which show progress so far. As you can see there is sti ....

March 2020 Meeting Source: 2mm Kent and Essex Area Group | 21 Apr 2020 | 12:03 am BST
Our March meeting was somewhat overshadowed by the coronavirus scare, however, five braved the journey to prepare and the now familiar task of loading the cars for our next exhibition appearance at the Abingdon amp; District MRC (ABRAIL) on Saturday 21 March.We have been experiencing a mysteriou ....

The Covid-19 Coronavirus lockdown has meant that we were unable to have our scheduled April meeting. The idea of looking back over the last twelve months of being 'on the road' with Lightermans Yard suggested a way of keeping our social presence. It so happens that we were showing off pretty regular ....

Siding Ballast Source: 2mm North East Area Group | 18 Apr 2020 | 8:46 am BST
Geoff Hodson asked a question regarding ballasting and I answered in the comments section of his posting. Briefly it's artist water colour paper cut to size and laid between the Easitrac sleeper base in a bid to represent neglected track which has been almost buried by 'muck'- equally it could be us ....

Made in Darlington Source: 2mm North East Area Group | 14 Apr 2020 | 12:15 pm BST
In these difficult and extraordinary times Mick has cast the net for contributors to this blog wider than usual (Thanks Mick). That explains why I, a southern interloper, am writing about my current projects. It's not all bad though because, despite my modelling being focussed on the Cheshire Lines  ....

It's been a while! Source: 2mm North East Area Group | 5 Apr 2020 | 2:13 pm BST
Hello again all, and hoping everyone is well and keeping safe in these unusual times! It certainly has been a while since I was on here, and having just had an e-mail from Mick offering to reinstate me I have jumped at the chance. Mind, I needed Mick's help to remind me how to get a posting done! A ....

I noticed this morning that one of the chassis was not sitting quite square under the mineral wagon body, so I decided to split the two and re-attach in the (hopefully) correct position. To keep my attention span going, I had just made a fresh cup of coffee, which was sitting near the edge of the ta ....

(No title) Source: 2mm Grampian Area Group | 4 Apr 2020 | 7:48 pm BST
Although our meetings are cancelled due to the current situation, Roy has been working away on his own making some changes to the sidings on Dunallander. Originally there were 6 sidings which were straight and parallel. They have now been reduced to an authentic 4 sidings following the red ....

Scrapheap challenge Source: 2mm North East Area Group | 4 Apr 2020 | 7:32 pm BST
Hi All, In the spirit of keeping in touch, I thought I would update you with what I've been working on during the lockdown (apart from actual work, that is!). I decided to have a go at scratchbuilding a Highland Railway 0-6-0T 'scrap tank' to work my DJLC layout. This would never have bee ....

(No title) Source: 2mm North East Area Group | 4 Apr 2020 | 2:34 pm BST
As a change from gardening, I've been catching up on building wagon kits, some of which I have had in store for some time, others newly purchased - Shop 2 is too handy now! Completed are a further eight 16-ton mineral wagons, 4 DSI-braked with bottom doors, 2 with Morton 4-shoe brakes and no bottom  ....

NBR Waverley Source: 2mm North East Area Group | 28 Mar 2020 | 6:27 pm GMT
Hi everyone, As this is my first blog I am just experimenting by enclosing a picture of one of my locos posed on my previous layout. This is a 2mm scratch built loco but is a bit of a cheat. As I could not get sufficient adhesion on the Atlantic's driving wheels it is pushed along by a motorised co ....

Class 31 weathering Source: 2mm North East Area Group | 26 Mar 2020 | 12:57 pm GMT
Nice to see others posting here. Thanks Geoff, I'll just put this quickie update on before you post some more. Here is just one photograph of the class 31 recently weathered and, as you can see, it's now Thornaby based 31 283. Weathered, except for the windows that is - compare with the last pictur ....

Having invited others to post on here I ought to lead the way; so here goes with my second sound fit, of a 2FS locomotive, a Farish class 31. Of course the conversion is straightforward for getting the model to run on 2FS track. It is a case of either turning the wheels yourself or sending off to th ....

NEAG Activity Source: 2mm North East Area Group | 22 Mar 2020 | 12:45 pm GMT
Because of the current situation regarding 'Coronavirus' our group meetings are suspended. Group members are invited to post modelling activity to this blog. If you would like to put something on here just get in touch by the normal means. Keep safe everyone. Mick S. ....

The list above is automatically generated from RSS feeds, using SimplePie, which is a freely available script.

Note: Feb 18th 2019: RMWeb blogs now have an option to enable RSS on them. If you have a Blog on RMWeb and wish it to appear in the above list, please enable RSS on your RMWeb blog, and then contact the webmaster to have it included in the above list.

March 2020: Annual editing of the feed list threw up a few dead blogs, so they've been removed from the auto-checker (which has also fixed the page load speed - it was waiting for these dead blogs to not answer). If you've re-started your blog, and it doesn't appear in the list below, or postings fail to appear above, please get in touch with the webmaster.

Sites checked: 2mm North East Area Group 2mm Kent and Essex Area Group 2mm Grampian Area Group Forth & Clyde Area Group St Ruth Modbury Updates Lillesand Flaksvandbanen i titteskap (diorama) kyle of lochalsh MRPAGESAQY Basingstoke Area Group Hydraulic Heaven Anthony Yeates' 2mm Blog Pennine 2mm Area Group Wealden Area Group Swinton 2 mm eveleighcreations Return of the Sith - Sithlord's Railway Blog Finescale N in Norway. RENA 1900 Building the 2mm 08 shunter kit

Sites list is edited fairly regularly, and those without new entries in the last two or three years are removed, assumed defunct. So, if your site comes back to life, please get in touch to be reinstated. For advice on adding your site to the above, and a set of easy to install tools for websites, please contact the webmaster. I have added a short article about using SimplePie to make this page