close
The Wayback Machine - https://web.archive.org/web/20240813015355/https://www.geeksforgeeks.org/specific-heat-capacity/
Open In App

Specific Heat Capacity

Last Updated : 04 Feb, 2024
Comments
Improve
Suggest changes
Like Article
Like
Save
Share
Report
News Follow

Specific Heat Capacity is one of the fundamental physical properties of matter that describes the amount of heat energy required to increase the temperature of 1 kg of matter by 1o Celsius. the SI unit of Specific Head Capacity is J/(KgK), but other than this Specific Heat Capacity is also measured in cal/(gK) or J/(g°C). For any matter, specific heat capacity depends on its composition, density, and the physical state of the matter, as for the different states of water specific heat is different. 

With this article, we will learn about the concept of Specific Heat Capacity and the other concepts in thermodynamics related to it.

Heat Capacity

The amount of heat energy required to increase the temperature of a given quantity of matter by 1°C, is known as the Heat Capacity of that matter. Heat Capacity is an extensive property of matter as it varies with the size and quantity of the matter.

Heat capacity is a measure of a system’s total internal energy. This comprises the system’s overall kinetic energy as well as the potential energy of the molecules. It has been demonstrated that a system’s internal energy may be altered by either giving heat energy to it or doing work on it. The internal energy of a system is shown to grow as the temperature rises. This rise in internal energy is affected by temperature differences and the amount of substance present in the system

Mathematically, the heat capacity is given by:

c = Q /ΔT

where,

  • Q is the amount of heat energy necessary to cause a temperature change of ΔT 
  • c is the heat capacity of the system under consideration.

Unit of Heat Capacity

The SI unit of heat capacity is Joule per Kelvin (J/K) or Joule per degree Celsius (J/°C).

Specific Heat Capacity

Specific Heat Capacity is a physical characteristic of the system and is defined as the amount of energy required to increase the temperature of 1 unit substance by 1°C.

Specific Heat Capacity

 

It is also an example of an extensive property because its value is proportional to the size of the system under consideration. Specific heat capacity, in general, is a measure of how much energy it takes to change the temperature of a system. However, it is critical to understand that the energy intake must be through heating. If work is done on the system, the temperature will rise; however, attempting to compute the temperature rise using the heat capacity and the quantity of work done on it is inaccurate.

Another thing to consider is the limitation that the system is held to. Because the latter does work on its surroundings as it expands, the specific heat capacity of a system kept at constant volume differs from that of a system held at constant pressure. Such discrepancies are typically overlooked when dealing with solids, but they are critical when working with gases.

Specific Heat Capacity Formula

A solid’s or liquid’s specific heat is the amount of heat required to increase the temperature of the unit mass of the solid by 1° C. It is represented by the symbol C.

If ΔQ is the amount of heat necessary to raise the temperature of mass m through ΔT, then the formula for specific heat is:

C = ΔQ ⁄ m ΔT

ΔQ = m c ΔT

Unit of Specific Heat Capacity

As it is the amount of heat required to increase the temperature of 1 kg of matter by 1 K. Thus, 

  • SI unit of  Specific Heat Capacity is always J kg-1 K-1. 
  • In the cgs system, the unit of Specific Heat Capacity, Cal/(g°C) or J/(g°C) 
  • Dimensional Formula of Specific Heat Capacity is [M0 L2 T-2 K-1]

Specific Heat Capacity of Various Substances

The specific Heat Capacity of various substances in their different states of matter is shown in the following table.

Substance

          State        

 

Specific Heat (J/(g°C))

Water

Liquid

4.18

Water

Solid

2.06

Water

Gas

1.87

Ammonia

Gas

2.09

Ethanol

Liquid

2.44

Aluminum

Solid

0.897

Carbon(Graphite)

Solid

0.709

Copper

Solid

0.385

Gold

Solid

0.129

Iron

Solid

0.449

Lead

Solid

0.129

Mercury

Liquid

0.14

Silver

Solid

0.233

Molar Specific Heat

The molar specific heat of a matter is an amount of heat required to raise the temperature of one mole of substance by 1 °C  or 1 °K.

Molar Specific Heat Capacity is denoted by the third alphabet of the English language “c”(lower case) and its unit is J/(mol K) or J/(mol °C). Mathematically Molar Specific Heat is given by the following formula: 

c = Q/(n ΔT)

Q = ncΔT

where,

  • Q is the amount of energy required to chagne temperature by ΔT
  • n is the number of moles of the substance
  • c is the specific heat of the system under considertation

Note: This formula tells us how much energy is required to raise the temperature of n moles of solid by ΔT.

Specific Heat of Water

Specific heat capacity of water at NTP(normal pressure and temperature) is approximately 4.2 J ⁄ (g°C) or 1 Cal ⁄(g°C) which implies that we need 4.2 joules of energy to raise the temperature of 1 gm of water by1 °C. 

As water is not a conductor of heat, thus this number is actually pretty high compared to the other substances. Even water vapor has a higher specific heat capacity than many other materials at normal temperatures. Water vapor’s specific heat capacity at normal pressure and temperature is approximately 1.9 J ⁄ (g°C). For the solid form of water i.e., ice, the specific heat capacity is 2.06 J ⁄ (g°C).

Water has a high specific heat capacity, which means that its temperature changes more slowly compared to other liquids when it absorbs or releases heat. This property allows water to absorb heat without causing an instant temperature increase and to retain its temperature for a longer period than many other substances. In the human body, we use this property of water to maintain a stable body temperature. A lower specific heat value of water would result in a higher risk of underheating and overheating in our bodies.

Specific Heat at Constant Pressure and Constant Volume

The specific heat at constant pressure and constant volume is discussed below in the article.

Specific Heat at Constant Pressure

The specific heat capacity at constant pressure (CP) is the amount of heat energy required to increase the temperature of a substance by one degree Celsius or Kelvin while keeping the pressure constant. CP includes the heat energy required to raise the temperature of the substance as well as the work done by the substance as it expands against the constant pressure.

Specific Heat at Constant Volume

The specific heat capacity at constant volume (CV) is the amount of heat energy required to increase the temperature of a substance by one degree Celsius or Kelvin while keeping the volume constant. CV only includes the heat energy required to raise the temperature of the substance since there is no expansion work being done against a constant volume.

Relation between CP and CV

The way gas is heated affects the behavior of the gas, the volume and pressure change in temperature, and the amount of heat necessary to increase the temperature of 1gm of gas by 1° C. We can heat the gas with a variety of P and V values.

As a result, the specific heat value is limitless. If we don’t deliver a steady quantity of heat, the gas’s specific heat will change. As a result, we will need a constant pressure or volume of specific heat.

For an ideal gas,

CP – CV = n R

where,

  • CV is heat capacity at constant volume
  • CP is heat capacity at constant pressure
  • R is the molar gas constant
  • n is amount of substance

The value of the Gas Constant, R = 8.3145 J mol-1 K-1

Heat Capacity Ratio: CP ⁄ CV 

The adiabatic index is also known as the heat capacity ratio or ratio of specific heat capacities (CP:CV) in thermodynamics. The ratio of heat capacity at constant pressure (CP) to heat capacity at constant volume (CV) is defined as the heat capacity ratio.

The isentropic expansion factor, commonly known as heat capacity ratio, is indicated by γ for an ideal gas (gamma). As a result, specific heat ratio, γ is equal to ratio of CP to CV, i.e. 

γ = CP ⁄ CV

Why is CP Greater than CV?

The specific heats of an ideal gas are represented by CP and CV. This is the amount of heat required to raise the temperature of unit mass by 1° C. By the first law of thermodynamics,

ΔQ = ΔU + ΔW

where,

  • ΔQ is the amount of heat that is given to the system
  • ΔU is the change in internal energy
  • ΔW is the work done

At constant pressure, heat is absorbed to raise internal energy and do any work on the system. On the other side, heat is absorbed just to raise internal energy at constant volume, not to do any work on the system. As a result, the specific heat under constant pressure is greater than that at constant volume, i.e. Cp > Cv.

Uses of Specific Heat Capacity

The concept of specific heat capacity is used for the following below purposes,

  • Insulators make use of materials with a high specific heat capacity. Take, for instance, wood. Houses built of wood are better suitable for areas with high or low temperatures.
  • Swimming pool water used to be cold in comparison to the temperature outdoors due to the high specific heat of the water.
  • Cooking utensils are made of a low-specific-heat material. You can immediately heat their bottoms. This is due to their polished aluminum or copper bottoms. To maintain the heat and safeguard our hands, the handles of these utensils are made of high-specific heat material.

Also, Read

Solved Examples on Specific Heat Capacity

Example 1: Calculate the heat required to raise 0.5 Kg of sand from 30° C to 90° C? (Specific Heat of sand = 830 J ⁄ Kg °C)

Answer:

Given:

  • Mass of sand, m = 0.5 Kg
  • Temperature difference, ΔT = 90° C – 30° C = 60° C
  • Specific heat of sand, C = 830 J ⁄ Kg °C

The formula for specific heat capacity is given as:

C = ΔQ ⁄ m ΔT

Rearrange the formula in terms of Q.

Q = m C ΔT

= 0.5 Kg × 830 J ⁄ Kg °C×  60° C

= 24900 J.

Hence, the required heat to raise the sand temperature is 24900 J.

Example 2: Determine the temperature difference if 40 Kg of water absorbs 400 K J of heat.

Solution:

Given:

  • Mass of water, m = 40 Kg
  • Heat transfer, Q = 400 KJ,
  • Specific heat of water, c = 4.2 × 103 J ⁄ Kg °C

The formula for specific heat capacity is given as:

c = ΔQ ⁄ m ΔT

Rearrange the formula in terms of ΔT.

ΔT = ΔQ ⁄ c m

= (400 × 103) ⁄ (4.2 × 103 × 40) °C

= 2.38 °C

Hence, the temperature difference is 2.38 °C.

FAQs on Specific Heat Capacity

Q1: Define Specific Heat Capacity.

Answer:

The quantity of heat energy required to increase the temperature of a substance per unit mass is referred to as its Specific Heat Capacity. 

Q2: What is Difference between Heat Capacity and Specific Heat Capacity?

Solution:

Specific heat capacity is the heat needed to raise a substance’s temperature by 1 degree Celsius. Similarly, heat capacity is the ratio between the energy provided to a substance and the corresponding increase in its temperature.

Q3: What is Heat Capacity Ratio?

Answer:

It is the ratio of two specific heat capacities, CP and CV is given by: 

γ =  Heat Capacity at Constant Pressure (CP)/ Heat capacity at Constant Volume (CV)

γ = CP / CV

Q4: How to Calculate  Specific Heat Capacity?

Answer:

If ΔQ is the amount of heat necessary to raise the temperature of mass m through ΔT, then the formula for specific heat is:

C = ΔQ ⁄ m ΔT 

ΔQ = m c ΔT

Q5: What is  SI unit of Specific Heat Capacity?

Answer:

It is the amount of heat required to increase the temperature of 1 kg of liquid or solid by 1 K in SI units. Its SI unit is always J kg-1 K-1. And its CGS unit is always Cal g-1 C-1.

Q6: What is Specific Heat Capacity of Ice, Water, and Steam?

Answer:

  • Specific Heat Capacity of Ice is 2.108 kJ/kg-K
  • Specific Heat Capacity of Water is 4.187 kJ/kg-K
  • Specific Heat Capacity of Steam is 1.996 kJ/kg-K

Q7: What is Specific Heat Capacity of Air?

Answer:

The specific heat of air at constant pressure is 1.005 kJ/kg-K.

Q8: How Specific Heat of Gas is calculated?

Answer:

The Specific Heat of Gas is calculated by using the formula,

CP = CV + R



Previous Article
Next Article

Similar Reads

Differences between ‘heat capacity’ and ‘specific heat capacity'
Energy can exist in many structures and heat is one of the most interesting. Heat is regularly covered up, as it possibly exists when on the way, and is moved by various particularly various strategies. Heat move contacts each part of our lives and assists us with understanding how the universe's capacities. It makes sense of the chill we feel on a
6 min read
Explain the Specific Heat Capacity of Water.
The specific heat capacity of water is defined as the amount of heat energy required to raise the temperature of a unit mass of water by one degree Celsius (or one Kelvin). It is a vital physical property that distinguishes it from most other substances. It Water has an exceptionally high specific heat capacity of 4.184 joules per gram per degree C
1 min read
Heat Capacity
Heat capacity or thermal capacity is an extensive property of matter, that defines its physical property. Heat Capacity is the amount of heat that must be applied to an object in order to cause a unit change in temperature. Heat capacity is measured in Joules per Kelvin (J/K), which is its SI unit. When heat capacity is divided by the mass of the s
8 min read
Applications of Specific Heat of Gas
The specific heat of gases is like their heat-holding capacity. Engineers rely on this to create effective heating and cooling setups, such as air conditioners and heaters, in homes. It also helps in studying climate patterns, as gases like air react differently to heat changes. It's similar to knowing the right ingredients for cooking to get the p
4 min read
Sample Problems on Heat Conduction
Heat may be transferred via any substance made up of atoms and molecules. At any one time, the atoms are in many states of motion. Heat or thermal energy is produced by the motion of molecules and atoms, and it is present in all matter. The more molecules move, the more heat energy is released. When it comes to heat transfer, however, it simply ref
8 min read
Heat Transfer Formula
Heat is a type of energy that moves from a hot to a cold thing. When we contact something cold, heat from our bodies is transferred to the cold item. Heat is transferred between objects of differing temperatures. The passage of heat ceases when the two objects reach the same temperature. Heat Transfer Heat transfer occurs when energy from a higher-
3 min read
Difference between Heat and Temperature
Heat and Temperature are two related terms that people may confuse often. It should be noted that Heat and temperature are two different quantities. The fundamental difference between heat and temperature is that Heat is the form of energy that transfers from a hot state to a cold state. The unit of Heat is Joule. However, the temperature is the me
5 min read
Heat Rate Formula
The total amount of energy required to produce one kilowatt-hour (kWh) of electricity using a power plant (plant heat rate formula) or an electric generator is referred to as heat rate. It is defined as the rate of input required to generate one unit of electricity. The ratio of thermal inputs to electrical output can also be characterized as heat
4 min read
Heat, Internal Energy and Work
Have ever wondered how does a heat engine work? or what's going in a glass of water kept on the table? When we normally observe a steady glass of water no kinetic or mechanical energy is noticed. But, when noticed under a microscope rapid motion of molecules is observed which determines the internal energy. Thermodynamics is the field of science th
8 min read
What is October Heat?
The term "October Heat" refers to unusually warm temperatures that occur during the month of October. October is often linked with milder weather as fall sets in, however, weather patterns can occasionally lead temperatures to spike unexpectedly. High-pressure systems, warm air masses, and other meteorological patterns that cause temperatures to so
3 min read
three90RightbarBannerImg